Red Pitaya HAMlab 80-10 10W User Manual page 23

4. When the USB WiFi dongle is plugged in, the system will recognize it and enabled additional
settings.
5. Select Client Mode, Desired WiFi network, Insert password and click Connect.
6. When your HAMlab is connected the IP address will be shown on the user interface. This IP
address is only for WiFi connection. You can check the connection by inputting a WiFi IP address
in the web browser URL field (press enter after inputting).
Now you have WiFi connection established. If you restart HAMlab it will connect to selected
network automatically (if selected network is available). Also you can disconnect LAN
connection and your HAMlab will be still available over the WiFi network i.e WiFi IP address.
Note
WiFi networks are generally not robust and the full performances of the HAMlab applications can be
affected.
The manual is made on the site
Red Pitaya HAMlab Documentation
https://trcvr.ru 23