Red Pitaya HAMlab 80-10 10W User Manual page 18

2.5.2. Wired
2.5.2.1. Local Area Network (LAN)
This is the most common and recommended way of connecting and using your HAMlab. Your LAN
network needs to have DHCP settings enabled which is the case in majority of the local networks, whit
this, simple "plug and play" approach is enabled. Having HAMlab connected the local network will
enable quick access to all applications using only your web browser. Simply follow this 3 simple steps:
1. Connect power supply to the HAMlab
2. Connect HAMlab to the router or directly to the PC Ethernet socket
3. Open your web browser and in the URL filed type:
Note
xxxxxx are the last 6 characters from MAC address of your HAMlab. MAC address is written on the back
HAMlab panel.
After the third step you will get a HAMlab main page as shown below.
The manual is made on the site
Red Pitaya HAMlab Documentation
Figure 1: Connecting your HAMlab to the LAN network.
https://trcvr.ru
rp-xxxxxx.local/
18