BIO RAD Helios Gene Gun System Instruction Manual page 13

5 O-rings, Tubing Prep Station
■
Two 1/8" barb-to-male luer fittings
■
5/64" Allen wrench
■
Syringe Kit
■
− 5 10 cc syringes
− 5 1/8" barb to female luer fittings
− 1 syringe adaptor tubing (silicone, 5' (~2.6 m), 0.104" ID, 0.192" OD)
Fig. 3. Major components used for sample delivery with the Helios Gene Gun.
Optimization Kit
GoldCoat Tubing (50' (~26 m))
■
1.6 µm gold microcarriers, 0.25 g
■
1.0 µm gold microcarriers, 0.25 g
■
0.6 µm gold microcarriers, 0.25 g
■
Polyvinylpyrrolidone, MW 360,000 (0.5 g)
■
5 desiccant pellets (store tightly sealed)
■
5 cartridge collection/storage vials
■
Note: If any of the system components (Helios Gene Gun, Tubing Prep Station, tubing cutter, helium
regulator, or helium hose) are dropped, check them for proper operation before use.
Cartridge extractor tool
Helium regulator
Helium hose (6')
Section 3 Product Description
Cartridge holder
Barrel liner
Helios Gene Gun System | 9