Advertisement
Exercise 6: Field to Finish,
After picking up your points in the field, you can return to
Well Done
the office to download the points.
TPS 700auto – 3-Steps to Productivity
Exercises
Step
13
Now we are ready to go!
•
Input a starting point number in the PtId
field, press Enter.
•
Specify the height of the target
•
Assign a Code to a point by pressing the Enter
key in the Code field.
o
o
o
o
o
•
After you've set the Code, use the Trigger key
to shoot and record the point.
•
You can use RL, ATR, or even manually point to
locate the point.
ATR by accessing the FNC key at any time in the
Surveying Measure screen)
14
Locate 20 to 30 more points.
•
What happens when you want to create a Code for
a point on the fly.
new Code in the Code field before locating the
point.
Continued
Action
To shoot and record a point:
Here is your Codelist again.
Use the Arrow keys to select a Code for
the point you are going to locate
Select <SET> to accept the Code
Hey wait a minute!
Code with a Mandatory Attribute, you will
be prompted for additional information.
After defining the attributes, select
<SET>
The Surveying Measure screen is displayed
again.
(Hint: You can access RL and
Try it!
If you've selected a
Just type in a
Continued on next page
Dec, 2001
Page 22/27
Advertisement
