Advertisement
Exercises in Configuring your TPS700auto,
Continued
Set the Date and Time on your instrument
Exercise 5
Exercise 6
To use an external hand held data collector, you must make two settings on your
instrument. Please view these settings screens, now:
TPS 700auto – 3-Steps to Productivity
Exercises
Step
1
Go to the PC Communications screen (in ALL SETTINGS). These
communication parameters must match the communications parameters
on the hand held data collector. Most data collectors have options that
let you select your Leica instrument and com settings
2
In System Settings, change the Data Output field to RS232. This
instructs the instrument to send data to the RS232 port, where the data
collector cable connects to the instrument.
Action
Continued on next page
Dec, 2001
Page 6/27
Advertisement
