Exercise 2: Installing Leica Survey Office,
Continued
Set-Up
From the LSO main screen, you will notice seven menu selections:
In the following steps, you will learn how to set up LSO using the Register and the
Settings menus.
TPS 700auto – 3-Steps to Productivity
Exercises
•
Data Exchange Manager: Used transfer data and Codes to and from the
instrument and PC.
•
Codelist Manager: Used to build Codelist files containing your descriptor
codes.
•
Software Upload: Used for uploading software upgrades and updates to
your instrument.
•
Coordinate Editor: Used for building, importing and translating coordinate
data
•
Register: Used to configure LSO for your instrument.
•
Settings: Used to configure communication parameters for your PC and
instrument.
•
External Tools: Used to link programs to LSO for easy access.
Step
1
Click on the big red Register button.
2
A pop window is displayed. Select Instruments.
3
The Register Instruments dialog box is displayed.
4
Highlight your TPS700auto instrument in the right hand Leica Instrument
window, then press the ">" button to register your instrument.
5
Your instrument is displayed in the Installed Instruments window. Click
the OK button to return the LSO main screen.
6
Now, click the big red Settings button. The General Settings dialog box
is displayed.
7
In the General Settings dialog box, under Current Selection:
•
make sure that the proper Port is selected. This is the
communications port (serial port) on your PC that you will use to
transfer data.
•
Also, make sure that your instrument is selected on the
Instrument list.
8
In the General Settings dialog box, under Setiings:
•
Use the default communications settings
•
These values match your instrument's default settings
9
Press the OK button to save the settings and return to the LSO main
screen.
Note: The next exercise will use the LSO Codelist Manager.
Action
Continued on next page
Dec, 2001
Page 12/27