Advertisement
Exercise 1: Making some measurements,
Using the
Here are a few features that come in handy:
Reflectorle
•
ss EDM
Quick Tips...
•
•
Note:
TPS 700auto – 3-Steps to Productivity
Exercises
From the Meaure and Record screen, press SHIFT, then EDM for the EDM
Settings screen. Take a look at the various EDM and Prism selections.
RL-Short is the reflectorless EDM. Do not use a prism in the RL-Short mode.
RL-Prism is for long range red laser measurements to a reflector. You can
achieve a 5000m shot to a single prism in RL-Prism.
Set the EDM Mode to IR Fine, then look at the Prism Trpe selections, using your
arrow key. The prisms listed are the Leica Round, 360, and mini prisms. There
is also a User prism available. If you have another manufacturers prism you
can use it with your TPS700auto. Just set the Prism Constant.
• The Leica Prism Constant is not the same as a prism
offset.
A constant value of –34mm (the offset for a
Leica Round prism) is applied to each value.
Therefore, a Leica Round prism with a prism offset of –
34mm has a Prism Constant of 0.
This looks more confusing than it really is: If you have a prism with a –
30mm offset, input a Prism Constant of +4. ( -30mm –(-34mm) = + 4mm).
Continued
Continued on next page
Dec, 2001
Page 10/27
Advertisement
