Advertisement
1
Step
: Configuring
From SYSTEM SETTINGS:
•
Press SHIFT, then Pg DN for page 2/3.
•
Make the settings to match those in the figure.
•
Then, press SHIFT, then Pg DN for page 3/3.
•
Make the settings to match those in the figure.
•
When you've finished configuring the SYSTEM
•
SETTINGS, use the Arrow keys to move to SET.
Press the ENTER key to store your settings and
return to the ALL SETTINGS MENU.
NOTES:
•
Data Output is set to Internal Memory. If you were to
•
use an external hand held data collector, this setting
would be changed to RS232 (serial port) connection.
The Trigger Key is over the horizontal tangent. We
•
have set to ALL to both measure and record with one
keystroke.
The User Key (found on your instrument keyboard) is
•
set to REC to record codes or measurements.
Page
10
Advertisement
