TRENDnet User's Guide
TEW-840APBO2K Setup and Installation
When purchasing the point-to-point bridge kit, mode TEW-840ABPO2K, by default, the
TEW-840APBO access points are preconfigured to establish a point-to-point wireless
connection using TDMA channel access method in WDS Access Point/Station. For
convenience, a unique predefined admin password has already been assigned to both
access points. You can find the preconfigured access point settings on the wireless
sticker or on the device label on the back of the unit. No additional configuration is
required.
© Copyright 2019 TRENDnet. All Rights Reserved.
On the device label located inside, you can also find the preconfigured default settings
of each access point.
The TEW-840APBO access points will be preconfigured with the following settings:
IP Address
Netmask (Subnet Mask)
IP Gateway (Default Gateway)
Primary DNS
Wireless Channel (Default)
Channel Access Method
Mode
WDS Encryption
TEW-840APBO / TEW-840APBO2K
TEW-840APBO #1
TEW-840APBO #2
192.168.10.50
192.168.10.51
255.255.255.0
255.255.255.0
192.168.10.1
192.168.10.1
192.168.10.1
192.168.10.1
48
48
TDMA
TDMA
WDS Access Point
WDS Station
WPA2
WPA2
18