Minimum Installation Requirements; Wireless Installation Tips - TRENDnet TEW-840APBO User Manual

TRENDnet User's Guide

Minimum Installation Requirements


Computer with RJ-45 Ethernet port and web browser

2 x RJ-45 Ethernet cables (not included) per TEW-840APBO

Additional TRENDnet TEW-840APBO or TEW-841APBO (For TEW-840APBO
single unit only, TEW-840APBO2K model includes two preconfigured units)
For wall mounting only (included wall mounting kit for drywall installations only)

Philips driver bit or screwdriver

Power drill/driver (for mounting anchors)

7/16 in (2.75 mm) straight drill bit for hard wood or 3/32 in (2.35 mm) bit
for soft wood (for mounting screws)

11/16 in (4.3 mm) straight drill bit for hard wood or 5/32 in (4 mm) bit for
soft wood (if required for drywall anchors)
© Copyright 2019 TRENDnet. All Rights Reserved.

Wireless Installation Tips

There are a number of factors that can impact the range of wireless devices.
1. Adjust your wireless devices so that the signal is traveling in a straight path, rather
than at an angle. The more material the signal has to pass through the more signal
you will lose.
2. Keep the number of obstructions to a minimum. Each obstruction can reduce the
range of a wireless device. Position the wireless devices in a manner that will
minimize the amount of obstructions between them.
3. Building materials can have a large impact on your wireless signal. In an indoor
environment, try to position the wireless devices so that the signal passes through
less dense material such as dry wall. Dense materials like metal, solid wood, glass
or even furniture may block or degrade the signal.
4. Antenna orientation can also have a large impact on your wireless signal. Use the
wireless adapter's site survey tool to determine the best antenna orientation for
your wireless devices.
5. Interference from devices that produce RF (radio frequency) noise can also impact
your signal. Position your wireless devices away from anything that generates RF
noise, such as microwaves, radios and baby monitors.
If you are still experiencing low or no signal consider repositioning the wireless devices
or installing additional access points. The use of higher gain antennas may also provide
the necessary coverage depending on the environment. Please note to use the wireless
connection quality indicators during installation to determine the optimal positioning
when mounting your access points.
TEW-840APBO / TEW-840APBO2K
6