Wireless - TRENDnet TEW-840APBO User Manual

TRENDnet User's Guide
3. Click Save at the bottom of the page to save your settings.
MAKE SURE THE CHANGES TO THE CONFIGURATIONS ARE

Click Changes
Apply .

Click Apply
© Copyright 2019 TRENDnet. All Rights Reserved.
APPLIED
from the top right menu bar, and click
OR
on the bottom right of any page:

Wireless

Network > Wireless
This page allows configuration of all wireless settings of the access point.
For more information on the differences between the modes, see
Method" on page 25 and "Application
1. Log into your access point management page (see
management page" on page 29).
2. Click on Wireless under Network from the left side menu. Please note, when
clicking Save, the settings are saved but not applied yet.
Wireless Settings

Device Name – Enter the desired name for this device. If changing the name.
Channel Access Mode

Select CSMA (Traditional) or TDMA for the channel access mode.

TDMA, proprietary, only works with TEW-840APBO for WDS bridging.

CSMA compatible with industry standards.

For more information, see "Channel Access
TEW-840APBO / TEW-840APBO2K
"Channel Access
Mode" on page 26.
"Access your access point
Method" on page 25.
33