TRENDnet User's Guide
System Log
System Manager > Log
This section contains the system logs for troubleshooting.
1. Log into your access point management page (see
management
page" on page 29).
2. Click on Log under System Manager from the left side menu.
System Log
Status – Click Enable to enable to system log.
Log Type – Click the dropdown and select the type of logs to display.
Refresh – Click Refresh to refresh the logs.
Clear – Click Clear to clear the logs.
Remote Log – Click Enable to output the logs to a remote server.
Log Server IP Address – Enter the IP Address for the remote log server.
3. Click on Apply to apply the log settings.
© Copyright 2019 TRENDnet. All Rights Reserved.
"Access your access point
Log Out
To log out of the access point, click logout from the top right menu from any screen,
then click OK on the pop-up dialog box.
TEW-840APBO / TEW-840APBO2K
45