Electromagnetic Compatibility; Dimensions; Vlt ® Onegeardrive Standard - Danfoss VLT OneGearDrive Operating Instructions Manual

Specifications

6.5 Electromagnetic Compatibility

The operation of the low-voltage machine in its intended
application must meet the protection requirements of the
EMC (electromagnetic compatibility) Directive 2004/108/EC.
Correct installation (e.g. screened cables) is the responsi-
bility of the system's installers. Precise information can be
taken from the operation instructions. For systems with
frequency inverters and rectifiers, the manufacturer's
electromagnetic compatibility information must also be

6.6 Dimensions

®
6.6.1 VLT
OneGearDrive Standard
74 147
115
®
Illustration 6.2 VLT OneGearDrive Standard
Illustration 6.3 Steel/Stainless Steel 30
®
VLT OneGearDrive Operating Instructions
483
78.5 184
M10x20 deep
®
MG75C302 - VLT is a registered Danfoss trademark
taken into consideration. The electromagnetic compatibility
directive in accordance with EN 61000-6-2 and EN
61000-6-4 is complied with given proper use and instal-
lation of the geared motors. This is also true in
combination with Danfoss frequency inverters and
rectifiers. The additional information provided in the
operation instructions must be taken into consideration
when using the motors in residential, commercial and
trade sectors, as well as in small businesses in accordance
with EN 61000-6-1 and EN 61000-6-3.
185
183
132
3.5
23
6 6