Chapter 9: Control Codes - Star Micronics Star SCP700 Series Programmer's Manual

30

Chapter 9: Control Codes

Important!
Please access the following URL
http://www.star-micronics.co.jp/service/sp_sup_e.htm
for the lastest revision of the manual.
This printer has two command modes: Star mode and ESC/POS mode.
The Star mode emulates thermal receipt printers such as the TSP200 series and
other previous models. The ESC/POS mode emulates the Epson TM-T85
receipt printer and the Epson TM-295 slip printer.
The Star mode commands are as follows.
Print Station Selection (Combo mode only)
Control codes
<ESC> "+" "A" 0
<ESC> "+" "A" <0>
<ESC> "+" "A" 3
<ESC> "+" "A" <3>
Character Selection
Control codes
<ESC> "R" n
<ESC> "/" "1"
<ESC> "/" <1>
<ESC> "/" "0"
<ESC> "/" <0>
<ESC> "b" n1 n2 n3 n4
d1 ... <RS>
<ESC> "M"
<ESC> "p"
<ESC> "P"
Hexadecimal codes
1B 2B 41 30
1B 2B 41 00
1B 2B 41 33
1B 2B 41 03
Hexadecimal codes
1B 52 n
1B 2F 31
1B 2F 01
1B 2F 30
1B 2F 00
1B 62 n1 n2 n3 n4
d1 ... 1E
1B 4D
1B 70
1B 50
Function
Select receipt printer
Select slip printer
Function
Select international character
set
Select slash zero
Select normal zero
Select bar code printing
Select 12-dot pitch printing
Select 7 9 (half dot) font
Select 14-dot pitch printing
Select 15-dot pitch printing
Select 5 9 (2 pulses = 1 dot)
font
Receipt- Slip
Page
printer printer
Receipt- Slip
Page
printer printer
36
36
36
36
36
37
41
41
41
41
41