Star Micronics Star SCP700 Series Programmer's Manual page 81

CODE
HEX
FUNCTION
<ESC> "#
1B 23
Set the memory switch. In order to enable changed memory switch
setting, turn the printer OFF and ON again or send printer reset
command (<ESC> "?"<LF><NUL>") to the printer. Changed
memory switch settings are stored in EEPROM and these setting will
be stored as long as the time when they are changed again.
N :Memory switch number ("0", "1", "2", "3", "4", "5")
n1n2n3n4 :Mode settings (For details see below)
1) N=0 (Star mode only)
n1 :Always "0"
n3 :Always "0"
Parameter
n2 Customer display commands
Parameter Setting
Receipt FF command Form Feed Paper Feed,
n4
FF cut mode
2) N=1 (Star mode only)
n1 :Always "0"
n2 :Always "0"
Parameter
n3 Zero style
n4 International character
set
n4 Country n4 Country
"0" USA "3" UK
"1" France "4" Denmark #1
"2" Germany "5" Sweden
n4 Country
"C" Latin America
N , n1n2n3n4"
N 2C n1n2n3n4
Setting
(Default)
"0" to "3"
—
(Default)
Setting "0"
Normal zero Slashed zero
n4 Country
"6" Italy
"7" Spain #1
"8" Japan
<LF>
0A
(Default)
"0" "1"
Valid Invalid
"4" to "7" "8" to "A"
Form Feed Paper Feed,
Cut & Back
Full-cut —
"1"
See below
n4 Country
"9" Norway
"A" Denmark #2
"B" Spain #2
77
<NUL>
00
"B" to "F"
Cut & Back
Partial-cut