Star Micronics Star SCP700 Series Programmer's Manual page 50

46
Page Formatting (Line Mode)
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION
<ESC> "C"
1B 43
Set page length in lines
Sets the page length using the current line spacing, where n is
between 1 and 127.
Changing the line spacing later does not alter the physical page
length.
The current line becomes the top of the page.
Resets the bottom margin.
Default page length is 42 lines.
This command is only valid with the receipt printer.
<ESC> "C"
1B 43
Set page length in inches
Sets the page length to n 24 mm, where n is between 1 and 22.
The current line becomes the top of the page.
Resets the bottom margin
This command is only valid with the receipt printer.
<ESC> "N"
1B 4E
Set bottom margin
Sets the bottom margin to n lines at the current line spacing, where n
is between 0 and 255.
Bottom margin is reset when you change the page length.
Setting is invalid if the printing area on one page is 36 mm or less.
This command is only valid with the receipt printer.
<ESC> "O"
1B 4F
Cancel bottom margin
Cancels the bottom margin.
This command is only valid with the receipt printer.
n
n
<0> n
00 n
n
n