Star Micronics Star SCP700 Series Programmer's Manual page 77

When n = 4, "4," special mode page mode functions as check high-speed printing mode.
CODE
HEX
FUNCTION
Value of n
0 or "0"
1 or "1"
2 or "2"
3 or "3"
4 or "4"
<ESC> "T"
1B 54
Setting print direction in page mode
Sets the direction in which the printing will be executed in page
mode according to the value of n.
This command is only valid in line mode.
0 rotation mode (uni-directional printing)
270 rotation mode (uni-directional printing)
180 rotation mode (uni-directional printing)
90 rotation mode (uni-directional printing)
270 rotation mode (bi-directional printing)
The default value of n is 0.
<Rotation direction examples>
n = 0 n = 1 or 4
0° rotation 270° rotation
12345•••
ABCDE•••
<N=4,"4": Check high-speed printing mode>
This parameter is only valid when no character data is expanded
into the page area, and this command is added immediately after
<ESC>"n".
Also, once the check high-speed printing mode has been entered
with <ESC>"T"4, it is not possible to move across to a different
rotation mode (<ESC>"T"0-3) until the page mode has been exited.
The check high-speed printing mode provides high-speed printing
with the check at a 270 degree rotation angle and bi-directional
printing, and a wide range of limitations have been included to
enable bi-directional printing.
n
n
Mode
n = 2
180° rotation
ABCDE•••
12345•••
n = 3
90° rotation
73