Star Micronics Star SCP700 Series Programmer's Manual page 54

50
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION
<ESC> "0"
1B 30
Receipt printer: Set line spacing to 3 mm
Sets the distance that the paper advances in
subsequent line feed to 3 mm.
Slip printer : Set line spacing to 1/8 inch
Sets the distance that the paper advances in
subsequent line feeds to 1/8 inch.
<ESC> "1"
1B 31
Receipt printer: Set line spacing to 3 mm
Sets the distance that the paper advances in
subsequent line feed to 3 mm.
Slip printer : Set line spacing to 7/72-inch
Sets the distance that the paper advances in
subsequent line feeds to 7/72-inch.
<ESC> "J"
1B 4A
Receipt printer: One time n/4-mm feed
Performs a line feed of n/4 mm only once after
printing the data in the line buffer. The space setting
for lines does not change. The value of n is between
1 and 255.
Slip printer : One time n/72-inch feed
Performs a line feed of n/72-inch only once after
printing the data in the line buffer. The space setting
for lines does not change. The value of n is between
1 and 255.
n
n