Star Micronics Star SCP700 Series Programmer's Manual page 85

CODE
HEX
FUNCTION
CODE
HEX
FUNCTION
N=D
n1 :Always "0"
n2 :Always "0"
n3 :Always "0"
Parameter
n2 Thermal head rank
Rank Average resistance value
A 1215 ± 67
B 1350 ± 67
C 1485 ± 67
<ESC> "@"
1B 40
Initialize printer
Reinitializes the printer. Clears the print buffer and returns settings
to their power-up values.
Does not clear the input buffer, downloaded characters, or conditions
for peripheral devices.
If this command is specified in page mode while printing using the
slip printer, printing is not carried out and the printer returns to line
mode from page mode.
This command cannot recover from errors or return to the on-line
status from off-line.
<ENQ>
05
Enquiry
Causes the printer to transmit a status byte.
Setting "0"
A
"1" "2"
B C
81
"3"
C