Safety Considerations - Perlick SIGNATURE Series Product Manual

PERLICK RESIDENTIAL ICE MAKER MANUAL
IMPORTANT SAFETY INFORMATION
This manual should be read carefully before the ice maker
is installed and operated. Only qualified service technicians
should install, service, and maintain the ice maker. Read the
warnings contained in this booklet carefully as they give
important information regarding safety. Please retain this
booklet for any further reference that may be necessary.
DAN
DANGER
This indicates that a hazardous situation
!
may occur when instructions are not followed. It is
imperative that directions in this guide are followed to
prevent possible serious injury or death.
WARNING
This indicates a situation where minor
injury, product or cabinet damage may occur if the following
instructions are not followed.
CAUTION
This highlights information that is of
significant importance.

SAFETY CONSIDERATIONS

DANGER
!
the use for which it has been expressly conceived. Any other
use should be considered improper and therefore dangerous.
The manufacturer cannot be held responsible for eventual
damage caused by improper, incorrect, and unreasonable
use. To reduce the risk of death, electric shock, serious injury,
or fire, follow basic precautions including the following:
▪ This unit requires an independent power supply. See the
nameplate for proper voltage and breaker/fuse size. Failure
to use a proper breaker or fuse can result in a tripped
breaker, blown fuse, or damage to existing wiring. This
could lead to heat generation or fire.
▪ THIS APPLIANCE MUST BE GROUNDED: This unit is
equipped with a 3-prong grounding plug to reduce the
risk of potential shock hazards. It must be plugged into a
properly grounded, independent wall outlet. If the outlet is
a 2-prong outlet, it is your personal responsibility to have
a qualified electrician replace it with a properly grounded,
independent 3-prong wall outlet. Do not remove the
ground prong from the power cord and do not use an
adapter plug.
▪ Do not use an extension cord.
▪ Make sure the control switch is in the "OFF" position
before plugging in or unplugging the unit to reduce the risk
of electric shock.
▪ Do not use a unit with a damaged power cord. The power
cord should not be altered, jerked, bundled, weighed
down, pinched, or tangled. Such actions could result in
electric shock or fire. To unplug the unit, be sure to pull the
plug, not the cord, and do not jerk the cord.
▪ To reduce the risk of electric shock, do not touch the plug
or control switch with damp hands.
▪ This unit should be disassembled or repaired only by
qualified service personnel to reduce the risk of electric
shock, injury, or fire.
▪ Do not make any alterations to the unit. Alterations could
result in electric shock, injury, fire, or damage to the unit.
This ice maker should be destined only to
perlick customer service (800)558-5592 | 3