Only For Qualified Installers
Installation Options
This section deals with basic installation with an Arch
face. It does not describe every possible way to install
this fireplace. This is why it is important to have a
qualified installer do the installation.
The Serenity III can be laid in stone, brick, or other
masonry products. For this purpose, a special arch face
template ( part # 1-00-4238231 ) is available.
The installation must conform with local codes or, in
the absence of local codes, with the National Fuel Gas
Code, ANSI Z223.1 / NFPA 54, or the Natural Gas and
Propane Installation Code, CSA B149.1.
INSTALLATION
Typical Tile Facing Sectional View
Arch Face
Wonder Board
Tile
12
Drywall
Wood Mantel