Table of Contents
Advertisement
Quiet indicator will light up, indicating
that the printer
is in Quiet mode. Printing will be slightly slower.
To turn off Quiet mode, press the (FONT] key again while
the printer is in ready mode. The printer will beep again
to indicate that you have quit Quiet mode.
Saving current settings
(the Macro feature)
You can save the following settings for future use: font,
quiet, zoom resolution,
auto load position for single
sheets, and auto load position for fanfold forms (for a
description
of how to set the auto load position, refer to
page 60).
Put the printer in not-ready mode, hold down the (FONT]
key, then press and hold down the (PAPER] key. Wait
until the printer beeps twice and then release both keys.
The current settings are saved and the Macro indicator
lights up to indicate that the settings have been saved.
From now on, each time you switch on the printer, the
saved settings will come into effect.
Note:
If you wait too long before releasing the keys, the printer will
beep three times. The settings will not be saved and the indi-
cator will go off.
Note:
This setting has no effect if you are printing from a computer
running Windows
Page 62
Advertisement
Table of Contents
