Selecting a switch
While in the EDS Mode (EDS-1 or EDS-2), use the control panel's EJECT
button to select a bank switch. While the DATA indicator is off, the lit
indicator indicates the currently selected switch.
Lit Indicator
MULTI-PART
MULTI-PART + EJECT
EJECT
EJECT + LF
LF + ON LINE
Changing a switch setting
After selecting a bank and switch, press the control panel's LF button to
turn the switch on and off. The current setting of the switch is shown by the
POWER indicator: the indicator is lit when the switch is on, and is not lit
when the switch is off.
Printing the current switch settings
In the EDS Mode, hold down the control panel's ON LINE button, and then
press the LF button to print the current EDS settings. Asterisks on the
printout show whether a switch is turned on or off.
Exiting the EDS Mode
To save EDS settings you have made and exit the EDS Mode, press the ON
LINE .
Selected Switch
LF
1
2
3
4
5
6
Selecting a switch
21