D3 to D 5 - IBM code page or international
character set.
Various special characters
(for example, accented char-
acters) are needed for different languages.
For this rea-
son, you can select variations
on the standard character
tables. These are known as code pages or international
character sets.
If the printer is in IBM emulation mode (Al is OFF), or if
it is in Epson emulation mode (Al is ON), and the Epson
graphic character
set is selected (D2 is ON), settings D3
to D5 select a code page as shown in the following table:
If the printer is in Epson emulation mode (Al is ON) and
the Italic character set is selected (D2 is OFF), settings
D3 to D5 select a character set as shown in the following
table:
These code pages and character set variations
are listed
in the Appendix
starting on page 153.
Page 44