Table of Contents
Advertisement
The green READY light on the right-hand
side of the
panel indicates whether the printer is in ready mode or
not-ready mode, as already mentioned.
The other six lights are always either on or off.
The three lights on the left indicate the currently
selected font. If you are printing from Windows,
this set-
ting has no effect. However, if you are using MS-DOS,
this setting can determine which font is used for print-
ing. The settings of these three lights (on or off) indicate
the current font selection. This is explained in the next
section.
The three lights in the right-hand
column indicate
whether the Zoom, Quiet mode and Macro (saved set-
tings) features are currently in effect or not. The Zoom
and Macro settings do not apply if you are using Win-
dows.
The control panel can also be used to make Electronic
DIP Switch (EDS) settings. These are the feature settings
that come into effect automatically
each time the printer
is switched on. An explanation
of how to make Elec-
tronic DIP Switch settings is given in Chapter 4, starting
on page 37.
Page 26
Advertisement
Table of Contents
