Preparing The Printer; Opening The - Star Micronics LC24-30 Colour User Manual

Preparing the printer
Place the printer in the spot you have chosen and carry
out the following steps:
Opening the front cover
.
Hook your fingers under the two small projecting
tabs on either side of the front cover, grip the cover
firmly and pull upwards. The front cover should
open.
.
Now pull the cover up and forwards so that it swings
open as shown.
Note:
If you wish, you can remove the front cover completely. How-
ever, we strongly recommend that you put it back on the
printer again as soon as you have installed the ribbon car-
tridge. This cover prevents objects that may damage the
printer from getting inside it, and also reduces printing noise.
Page 9