Table of Contents
Advertisement
such as the current font. The light is on when the
printer is in ready mode. It flashes when it is in not-
ready mode.
The three lights arranged in the left-hand column of the
panel show which font is currently selected. If a single
light is on, the font next to that light is the currently
selected font. For example, if the top light only is on,
Roman font is selected. Similarly, the middle and bot-
tom lights on their own signify that Courier and Script
respectively
are selected. If two lights are on, the font
whose name is between the two lights is the selected
font. If the upper two lights are on, Sanserif is the
selected font. If the lower two lights are on, Prestige is
selected. If none of the three lights is on, Draft font is
selected.
Micro Feed
ALT
0
Macro
FF
A
Zoom
\
Sanserif is the selected font
To select a font from the control panel, put the printer in
not-ready mode.
Press the (FONT_] key until the lights
show the correct combination
for the desired font. The
combination
of lit and unlit LEDs changes with each key
press.
The three lights in the right-hand
column indicate the
status of the zoom, quiet mode and macro features. The
lights are on if these features are in effect. Conversely,
Page 35
Advertisement
Table of Contents
