Table of Contents
Advertisement
Selecting
Zoom mode print size
You can print at either 50% [half) or 67% (two-thirds)
normal size by using the Zoom mode. This is useful for
printing wide documents,
such as spreadsheets,
on a
single sheet.
Change the zoom size as follows. Put the printer in
not-ready
mode. Hold down the (FONTj key and press
the [PAPER] key to cycle through the three zoom settings.
The zoom light indicates the current selection as shown
in the table below.
Zoom
Zoom light
50%
On
67%
Flashing
100%
Off
Press the (-1
key to confirm your selection and put
the printer back in ready mode.
The printer beeps once to indicate that 50% zoom has
been selected, twice for 67%, or sounds a very short
beep to indicate that Zoom mode has been cancelled;
that is, 100% has been selected.
You can disable the Zoom feature by setting Electronic
DIP Switch setting A4 to OFF (see page 41).
Note:
This setting has no effect if you are printing from a computer
running Windows
Selecting
Quiet mode
To reduce the level of noise generated by the printer
during operation, you can put the printer into Quiet
mode. To do this, put the printer in ready mode and
press the [FoNTI key. The printer will beep once and the
Page 61
Advertisement
Table of Contents
