Table of Contents
Advertisement
EDS setting
El
Function
ON
OFF
I
I
I
E2
LO font selectIon
I
See below
I
E3
E4
E5
Reserved
Reserved
Al - Emulation
The LC24-30 Colour can "emulate" either an Epson LQ-
860 or an IBM Proprinter X24E. To "emulate" means to
"perform in the same way as". The two printers offer dif-
ferent sets of printable characters.
Unless you are using
an MS-DOS system and specifically
need the IBM char-
acter sets, you will probably use the printer in Epson
mode. The character sets used by both the Epson and
IBM emulations
are listed in the Appendix
starting on
page 153.
If you want to use the printer in IBM emulation mode,
you will also need to select an IBM printer driver (see
page 27 of Chapter 3).
A2 - Automatic
Emulation
Change
(AEC) mode
If this function is ON, the printer will automatically
select the correct emulation
mode (Epson or IBM)
according to the printer driver selected in your applica-
tion. For example, if the printer is in Epson mode and
you select an IBM printer from your word-processor
running in MS-DOS, the printer will automatically
switch over to IBM emulation
mode. This will allow you
to print characters
from the IBM character sets.
Page 40
Advertisement
Table of Contents
