Table of Contents
Advertisement
Loading fanfold
paper
Position the stack of fanfold paper behind the
printer.
Turn the printer off.
Pull the release lever forward.
If there is a single sheet that has been fed into the
printer, remove it.
Open the front cover by hooking your fingers under
the two small projecting
tabs on either side of the
front cover. Grip the cover firmly and pull upwards.
The front cover will come loose.
Now pull the cover up and forwards so that it swings
open.
Pass the fanfold paper through the horizontal
slot in
the back of the printer.
Open the rear cover by pushing it backwards
so that
it folds back and down. Pull the paper through.
Pull the gray levers on the tractors forward and
adjust the tractors' positions by sliding them side-
ways.
Page 76
Advertisement
Table of Contents
