Table of Contents
Advertisement
C4 and C5 - Print pitch
Pitch is the number of characters
in a one-inch line of
text. If you want to print using 10 characters
per inch
text, C4 and C5 should be set to ON. The settings for
other pitches are as shown in the table.
Print pitch
c4
c5
10 CPI
ON
ON
12 CPI
ON
OFF
15 CPI
OFF
ON
17 CPI
OFF
OFF
Dl - Print quality
If D 1 is ON, text is printed in Letter Quality mode. If it is
OFF, Draft quality text is printed. Letter Quality allows
you a choice of different fonts. Draft text is less attrac-
tive, but can be printed faster than Letter Quality text.
D2 - Character table
The D2 setting selects which characters
can be printed.
Selectable
characters
are grouped into sets known as
character tables. The character table selected depends
on the current emulation
(switch Al).
Emulation
Standard
(Epson)
IBM
ON
Graphic
character
set
IBM character
set #2
OFF
Italic character
set
IBM character
set #I
These character tables are listed in the Appendix
start-
ing on page 153.
Page 43
Advertisement
Table of Contents
