Table of Contents
Advertisement
Using the tear-off
function
You can remove finished fanfold output without disturb-
ing the current position of the paper.
.
Make sure that the printer is in ready mode, hold
down the (READV] key and then hold down the [PAPER)
key. Keep both keys held down. The printer starts to
feed the paper through the printer.
.
Release both keys. The printer automatically
goes
into not-ready
mode.
.
Tear off the paper, using the paper delivery selec-
tor's tear-assist
edge.
.
Press the (READY) key again. The printer winds the
paper back to its former position so that printing
can be resumed. The printer remains in ready
mode.
I
Page 82
Advertisement
Table of Contents
