Fixing The Hose At The Housing Rear - Binder VDL Series Mounting Instructions

GB GB
4.3.

Fixing the hose at the housing rear

Unscrew the corresponding Phillips screws on the vacuum
drying oven and use them to fasten the delivered brackets.
Attach the tube at these
brackets with the cable
ties:
Conduct the tube from behind into the vacuum module.
Install the tube downgrade and without loops toward the
Vacuum drying oven with mounted vacuum module and connected hose:
VD
Mounting instructions for vacuum module10/2016
pump. Cut it off if necessary.
VDL
Page 17/32