Table of Contents
Advertisement
User Manual
Ikompact transmitter
Maintenance
Ikompact troubleshooting guide
Color and frequency
Pulse frequency
Blue | fast pulses
Blue | continuous
Green | fast pulses
Green | continuous
Green | slow pulses
Red | slow pulses
Red | double pulses
Red | continuous
Orange | slow pulses
Orange | double pulses
10 |
©
Danfoss | February 2019
The transmitter has status monitoring LEDs which help to identify errors and warnings. The common
signals are shown in the table below.
Description
System is starting; establishing connection with radio
and EEPROM
System is in stand-by mode, waiting for user's action
Attempting to link with receiver and waiting for
response
Working
Latency; no action has been taken for some time
EEPROM module missing or corrupt
Radio communication error
Hardware failure
Critical battery signal
Activated maneuver
Action
Wait
Press START to enter operation
mode
Wait
Operate
Press START to return to operation
mode
Check EEPROM and reprogram if
necessary
Replace transmitter
Replace transmitter
Replace or charge batteries
Release maneuver
BC293071182708en-000101
Advertisement
Table of Contents
