User Manual Ikompact transmitter Technical description Ikompact dimensions and identification The illustration and list below describe dimensions, buttons and LEDs of the Ikompact transmitter. Dimensions in mm 35.5 60.5 1. Status LED 2. Feedback LEDs 3. Start push-button 4. Stop push-button 5.
User Manual Ikompact transmitter Technical description Ikompact start up Use the information below to properly turn the transmitter ON (OPERATION mode). 1. Place the EEPROM and the charged alkaline batteries. 2. Optional: If the transmitter has the STOP button, press and pull it out [1].
User Manual Ikompact transmitter Maintenance Ikompact maintenance tips This product is designed for use in an industrial environment that may shorten the product's lifespan. Use these tips to maximize the lifespan of the product. • Use the hook/belt provided with the transmitter to prevent the transmitter from falling •...
User Manual Ikompact transmitter Maintenance Ikompact troubleshooting guide The transmitter has status monitoring LEDs which help to identify errors and warnings. The common signals are shown in the table below. Color and frequency Pulse frequency Description Action Blue | fast pulses System is starting;...
Page 12
Phone: +86 21 3418 5200 Danfoss can accept no responsibility for possible errors in catalogues, brochures and other printed material. Danfoss reserves the right to alter its products without notice. This also applies to products already on order provided that such alterations can be made without subsequent changes being necessary in specifications already agreed.