Table of Contents
Advertisement
User Manual
IKORE B Transmitter
Maintenance
IKORE B maintenance tips
Maintenance tips quick reference
Troubleshooting 2.4GHz
Color and frequency
Pulse frequency
Blue | fast pulses
Blue | continuous
Green | fast pulses
Green | continuous
Green | slow pulses
Red | slow pulses
Red | double pulses
Red | continuous
Orange | slow pulses
Orange | double pulses
©
Danfoss | May 2021
This product is designed for use in an industrial environment that may shorten the product's lifespan. Use
these tips to maximize the lifespan of the product.
•
Use the hook/belt provided with the transmitter to prevent the transmitter from falling
•
Do not clean the transmitter with solvents or pressurized water; use a damp cloth or soft brush for
cleaning
•
If the push buttons show signs of deterioration, contact the Authorized Technical Service for repair
•
Check if the battery contacts are correct, otherwise replace them.
•
Ensure that the product is supplied with AAA alkaline batteries or has a rechargeable battery
•
Be sure to recharge or replace battery regularly
Description
Starting the system; establishing communications with
radio and EEPROM
Stand-by mode. Set up system, waiting user's action
Attempting to link with the receiver and waiting its
answer
Working
Latency; no action has been taken for some time
EEPROM module missing or corrupt
Radio error; radio communications error
General hardware failure
Critical battery signal
Activated maneuver
Action
Wait
Press START to enter operation
mode
Wait
Operate
Press START to return to operation
mode
Check EEPROM and reprogram if
necessary
Replace transmitter
Replace transmitter
Replace batteries with charged ones
Release maneuver
BC292582855621en-000201 | 9
Advertisement
Table of Contents
