Section 5 -Omni Tip™ Plastic Probes; Specifications - Omni PCR-258 User Manual

SECTION 5 —OMNI TIP™ PLASTIC PROBES

5.1 SPECIFICATIONS

7mm Diameter Disposable Plastic Generator Probe
Minimum Vessel Inside Diameter: 8 mm
Applications:
Soft Tissue Omni Tips: liquid/liquid or soft tissue processing
Hard Tissue Omni Tips: frozen or fibrous tissue processing
Processing Range: 0.25–30 mL
Length: 110 mm
The Omni Tips™ are disposable rotor-stator generator probes constructed of
durable plastic. Although Omni Tips™ are designed specifically to be dis-posed
of after each use to eliminate sample cross-contamination, for many applica-
tions, the probe can be cleaned, sterilized, or disinfected and reused by the
procedures described below.
Soft Tissue Omni Tip™
NOTE:
Omni Tip™ plastic probes are not factory presterilized or disinfected. If
this is a requirement, please use one of the recommended methods described
below.
Sterilization
Techniques:
Biological
Disinfection
Radioactive
Decontamination:
Recommended
* Autoclave up to 250°F
* Ethanlene Oxide
* Formaldehyde
* Gluteralhyde (%2)
* Gamma irradiation up to 5
MRAD
* Alcohol (70%)
* Hypocholorite (5%)
:
[chlorine bleach]
* Formaldehyde (40%)
* Radiacwash
* Count-off
* Water/ Ethanol/ SDS
Hard Tissue Omni Tip™
Not Recommended
* UV Irradiation
* Phenolic Derivatives
* Extended Exposure to
Guanidine
* Dichloromethane
14