Section 7. Transport, Storage & Service; Storage; Decontamination Requirement - Omni SONIC RUPTOR 400 User Manual

Ultrasonic homogenizer
Hide thumbs Also See for SONIC RUPTOR 400:
Table of Contents

Advertisement

SECTION 7. TRANSPORT, STORAGE & SERVICE
PLEASE NOTE: The Sonic Ruptor 400 MUST be shipped in its original packaging. Failure to
do so can result in serious damage to the unit and will void all warranties.

7.1 STORAGE

The unit can be used in a cold room, but it must be stored in a dry area at a temperature
ranging from 0ºC/32ºF to 50ºC/122ºF .

7.2 DECONTAMINATION REQUIREMENT

Should an instrument or component that has been used with radioactive or pathogenic
material require factory or field service, comply with the following procedure to ensure
the safety of service personnel:
Clean the parts to be serviced of all encrusted material and decontaminate them. There must
be no radioactivity detectable by survey equipment. Obtain a Decontamination Certificate
from Omni International. Complete the certificate and attach to the instrument or parts being
returned.
If no Decontamination Certificate is attached, and a potential radioactive or biological hazard
is detected or suspected by Omni International, the equipment will not be serviced until prop-
er decontamination and certification is complete. The sender will be contacted for
instructions as to the disposition of the equipment. Disposition costs will be borne by the
sender.
WARNING: It is a violation of federal law to transport biologically hazardous or radioactive
materials without proper packaging, labeling, and appropriate warnings.
15

Advertisement

Table of Contents
loading

Table of Contents