Instrument Labels; Instructions - PerkinElmer Caliper IVIS Spectrum Hardware Manual

2.2 Instrument Labels

Label
Laser caution label
Note: The actual warning
label mounted on the laser
module at the service
access inside the unit uses
non-fluorescing colors and
materials.
Read manual label
Pinch hazard label

2.3 Instructions

Read Instructions
Retain Instructions
Follow Instructions
Heed Warnings
6
2. Important Safety Instructions
Pay careful attention to the labels on the instrument.
Description
The Caliper IVIS Spectrum Imaging Instrument contains a Class 3R Laser module.
®
The instrument itself is classified as a Class 1 device because the user is safely
protected from the laser beam. The potential hazard of exposure to service
personnel is clearly indicated with a warning label per IEC 60825 and CDRH
requirements.
Where located on the IVIS system, the read manual label indicates that important
information about the labeled area can be found in the IVIS Spectrum Hardware
Manual.
Where located on the IVIS system, the pinch hazard label indicates the location of
a potential pinch point.
Read and understand all the safety and operating instructions before you install,
operate, or perform maintenance on this product. Make sure that you fully
understand the following safety instructions, warnings, and disclaimers before
proceeding to the rest of the manual.
Retain the safety and operating instructions for future reference.
Follow all operating and handling instructions. Failure to follow operating or
handling instructions may void any warranty covering this product.
Abide by all warnings on the product and in the operating instructions. Failure
to adhere to warnings or safety precautions may void any warranty covering this
product.