Description Of Parts; Uhf Pll Dual-Channel Diversity Receiver - JTS RU-12 Instruction Manual

4. Description of parts

4-1 UHF PLL dual-channel diversity receiver //

Power: means "ON" and
1
SET: this is for function settings. Push and hold for 2 seconds to enter the setting
2
mode. Push "SET" repeatedly to search for the function you wish to set.
▲/▼In the setting mode, push▲/▼to change the function parameter
3
In the non-setting mode: push▲/▼to adjust volume
LCD display
4
Lock :push and hold "Lock" for 2 seconds to lock the buttons in order to prevent
5
pushing any button by accident.
Remoset u : this allows user to synchronize the transmitter after modifying a param-
6
eter. Push "
Remoset indicator : this shows the current pairing status. It flashes rapidly when
7
data is being transmitted and the flashing stops when the synchronization is com-
pleted. However, the flashing slows down if synchronization fails after a period of
time of pairing attempt.
Ultrasonic transmission unit: it transmits digital pairing data at ultrasonic frequency.
8
When setting, direct the ultrasonic receiving element of the microphone to the ultra-
sonic transmitting unit of the receivers. The effective range is 30º on both sides with
the optimized distance at 30cm.
7
Front panel
7
8 2
R -12
6 3
means "OFF"
" to synchronize the settings to the transmitter.
4 3 5
UHF PLL DUAL CHANNEL DIVERSIT Y RECEIVER
2 1