Description Of Parts - JTS RU-901G3 Instruction Manual

Uhf pll
Hide thumbs Also See for RU-901G3:
Table of Contents

Advertisement

4. Description of parts

4-1 UHF PLL single-channel diversity receiver( True Diversity ) // RU-901G3
Front panel
Power On/Off switch:Press once to turn on the power,press and hold for 2
1
seconds to turn offf.
SET: this is for function settings. Push and hold for 2 seconds to enter the setting
2
mode. Push "SET" repeatedly to search for the function you wish to set.
▲/▼In the setting mode, push▲/▼to change the function parameter
3
In the non-setting mode: push▲/▼to adjust volume
LCD display
4
AF signal level
5
RF signal level
6
Volume control
7
Remoset u : this allows user to synchronize the transmitter after modifying a
8
parameter. Push " " to synchronize the settings to the transmitter.
Remoset indicator : this shows the current pairing status. It flashes rapidly
9
when data is being transmitted and the flashing stops when the synchronization
is completed. However, the flashing slows down if synchronization fails after a
period of time of pairing attempt.
Ultrasonic transmission unit: it transmits digital pairing data at ultrasonic fre-
10
quency. When setting, direct the ultrasonic receiving element of the microphone
to the ultrasonic transmitting unit of the receivers. The effective range is 30º on
both sides with the optimized distance at 30cm.
Antenna
11
10
7
WIRELESS MICROPHONE SYSTEM
9
6
5
MIN.
MAX.
VOL.
7
8
11
4
3
DIVERSITY RECEIVER
2
1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ru-g3thRu-g3tb

Table of Contents