Uhf Pll Body-Pack Transmitter - JTS RU-12 Instruction Manual

4-3 UHF PLL body-pack Transmitter //

Functions of the Panel
The LCD shows the parameters and settings of the Transmitter.
1
The Ultrasound Receiving Hole
2
REMOSET Indicator Light: Blue Light: The light flashes for 5 seconds, indicating
3
that frequency matching is successful. Flash Blue: Data Receiving Error
Power Key:
4
(1)ON: Simply press the Power Key.
OFF: Press and hold the Power Key for 2 seconds, until the display shows that
the power is off.
(2)Click the Power Key in the Setup Menu to return to the home screen.
▲、▼: Up/Down arrow keys for upward/downward selection.
5
SET: Set and save.
6
Mute Switch/LED Display: (1) The green light will flash when the power is on.(2)
7
The red light will flash at low voltage.(3) Mute the Transmitter is muted when
switched to the "MUTE" position, and the Green Light Signal will flash.(4) When
the Transmitter is "MUTE" + at low voltage, the red/green lights will flash alter-
nately.
Battery Slot
8
1
2
3
4
UHF PLL Transmitter
7
5
6
8
12