Through Cutting With Mutoh Grip (+); Convert Shapes To Cutthrough Lines; Verify Automatic Detection - MUTOH Kona Application Manual

Application Guide Kona / Kona apparel
Cutting through
5.5

Through cutting with Mutoh Grip (+)

5.5.1

Convert shapes to cutthrough lines

By loading a swatch library (downloadable from http://usernet.caldera.eu) in Adobe Illustrator,
one can define certain vector paths to be recognized automatically during your import
operation in your Grip / Grip+ environment.
Select the throughcut line in your design and convert it to a CutContourFullCut swatch from the
library.
5.5.2

Verify automatic detection

Step 1:
Step 2:
Step 3:
88
Import your design in Mutoh Grip (+).
Drag the design on the info button and click on the contour tab.
Verify the automatic detections of each line style specified.
AP-75381 - Revision 1.3