Application Guide Kona / Kona apparel
Installing CutServer
2.3.4
Available connections
All the cutters installed earlier are displayed in a list. The CutServer can be connected with
each cutter listed below.
Refer to
Right-click on one of the connections to backup or restore parameters
Refer to
Refer to
N°
1
2
3
4
5
6
7
8
Connection type
Depending on the type of the connection, another icon is visualised.
USB connection
Network connection
Serial connection
34
Install USB drivers on page 11
Machine tests on page 16
Restore the settings manually as follows on page 14
Description
Connection type
USB
LAN
Serial
Connection checkbox
Serial number Kona / Kona apparel /
machine type
Status connection
Progress bar
Go button
Machine info button
Settings button
to know how to install your cutter properly.
on page 34
on page 35
on page 35
on page 35
on page 35
on page 35
on page 35
on page 36
Extended description
AP-75381 - Revision 1.3