Safety Instructions, Operation; Safety Instructions, Assembly - bora PT11UMEN-000 Operating And Installation Instructions

Table of Contents

Advertisement

2.2

Safety instructions, operation

Cooktop
DANGER!
Danger of fire caused by leaving the cooktop
unattended!
Oil or fat in the pot can quickly heat up and
ignite.
Never leave oil or fat to heat up unattended.
X
X
Never extinguish oil and fat fires with water.
X
X
Suffocate the fire, for example by using a lid.
X
X
DANGER!
Danger of explosion caused by flammable
materials!
Flammable materials (spray) in the vicinity of
the cooktop can explode and cause serious
injury.
Do not place any flammable materials in
X
X
the vicinity of the cooktop.
DANGER!
Danger of electric shock!
Cracks, fissures or fractures in the glass
ceramic panel can damage the underlying
electronics. This can cause an electrical
shock.
If there are any cracks, fissures or
X
X
fractures in the glass ceramic, switch the
device off immediately.
Safely disconnect the device from the
X
X
mains using miniature or automatic circuit
breakers, fuses or contactors.
WARNING!
Risk of burns caused by a hot cooktop!
The cooktop and its touchable parts become
hot during operation. After turning off the
cooking zone, allow it to cool down to less
than 60°C first. Touching hot surfaces can
lead to serious burns.
Do not touch the hot cooktop.
X
X
Keep children away from the hot cooktop
X
X
unless they are under constant supervision.
WARNING!
Danger of fire caused by objects on the
cooktop!
The cooktop and its touchable parts become
hot when the cooking zone is switched on
and while it is cooling down. Objects on the
cooktop can heat up and ignite.
Do not leave any objects on the cooktop.
X
X
www.bora.com
WARNING!
Risk of burns caused by hot objects!
The cooktop and its touchable parts become
hot when the cooking zone is switched on and
while it is cooling down. Objects (pot lid, cook-
top extractor cover) on the cooktop become
hot very quickly and can lead to serious burns.
Do not leave any objects on the cooktop.
X
X
Use suitable aids (pot cloths, thermal
X
X
glove).
2.3

Safety instructions, assembly

Installation and assembly of the device may only be
carried out by trained personnel who are familiar with
and comply with common national regulations and
supplementary regulations of the local utility companies.
Work on electrical parts must only be carried out by
trained electrical personnel.
The electrical safety of the device is only guaranteed if it
is connected to a properly installed protective conductor
system. Make sure that these basic safety precautions
have been taken.
Cooktop
DANGER!
Danger of electric shock!
Connecting the device incorrectly to the mains
poses a risk of electric shock.
Make sure that the device has a fixed
X
X
connection to the mains voltage.
Make sure that the device is connected to
X
X
a properly installed protective conductor
system.
Make sure that technical equipment is
X
X
provided to allow for all of the device's
poles to be disconnected from the mains
with a contact opening width of at least
3 mm (miniature and automatic circuit
breakers, fuses, contactors).
DANGER!
Danger of electric shock!
The connection cable can be damaged if it
comes into contact with hot cooking zones.
A damaged connection cable can cause a
(fatal) electrical shock.
Make sure that the connection cable does
X
X
not come into contact with hot cooking
surfaces.
Make sure that the connection cable is not
X
X
caught or damaged.
Safety
EN
7

Advertisement

Table of Contents
loading

Table of Contents