Volume Control; Headphones Output; Monitoring Function - T+A PA 1100 E User Manual

5 Volume control

VOLUME

6 Headphones output

7 Monitoring function

MON
36
Continuous playback level adjustment.
Turning the knob clockwise increases the volume. Turning the knob counter clockwise
decreases the volume.
Continuous listening to programme material at very high volume can result in perma-

nent loss of hearing. You can avoid subsequent health problems by avoiding continu-
ous listening at high volume
Socket for stereo headphones with a minimum impedance of 32 Ohms.
Continuous listening to programme material at very high volume using headphones

or earphones can result in permanent loss of hearing. You can avoid subsequent
health problems by avoiding continuous listening at high volume through headpho-
nes or earphones
Pressing the monitor button enables you to monitor the quality of a tape or CD recor-
ding (tape monitor function). Pressing the Monitor button switches the monitor func-
tion on. When the monitor function is in operation the LED above this button flashes
red.
The tape monitor function only works if the recorder connected to the amplifier supports
j
this function.
If no recorder is connected, or if the recorder does not support the monitor function, the
music signal will be muted when you select the monitor function. If this happens, simply
switch the monitor function off again.