Connection Of Hdmi Devices; Connecting The Bluetooth Antenna; Connecting The Mains Cable; Wiring Diagram - T+A PA 1100 E User Manual

Connection of HDMI devices

Schließen Sie an die HDMI-Eingänge (IN 1 und IN 2) Quellegeräte, wie z.B. einen BluRay-Player oder eine
Spielkonsole an. An der Buchse „OUT" stehen die Bildsignale der beiden Eingangsbuchsen „IN1" und
„IN2" zur Weiterleitung an einen Fernseher zur Verfügung.

Connecting the Bluetooth antenna

To use the Bluetooth function of the PA 1100 E, the supplied antenna must be connected to the „BT"
socket.

Connecting the mains cable

Finally, connect the power cord to the PA 1100 E's AC power input, then connect all components to the
power supply. To achieve maximum possible interference rejection the mains plug should be connected to
the mains socket in such a way that phase is connected to the mains socket contact marked with a dot.
The phase of the mains socket can be determined using a special meter. If you are not sure about this,
please ask your specialist dealer.

Wiring diagram

Turntable
*
***
e.g. CD-player
Computer
* Only with built-in optional Phono module.
** Only possible with built-in HDMI module optionally installed at the factory.
*** For XLR connection, the switch must be set to „BAL"..
e.g. BluRay-player
**
e.g. Tuner
e.g. Disc-drive
IN
OUT
e.g. Cassette recorder
TV set
**
right loudspeaker
Remote control
receiver
left loudspeaker
43