Table of Contents
Advertisement
Controls and functions
1 On- / Off switch
2
Volume control / Source selection
SOURCE /
VOLUME
3
Navigation and control
SELECT
16
Touching the
button briefly switches the device on and off.
j
The
button remains dimly lit even in stand-by mode, to indicate that the
PSD 3100 HV is ready for use.
This rotary knob is used to set your preferred volume in accurate 1 dB increments.
The value currently set is displayed on the screen.
To select the disred listening source, briefly press the knob before rotating it; your
chosen source then appears on the screen. After a short delay the machine switches
to the appropriate source.
The main function of this knob can be changed if necessary. In this case, the button
j
must be pressed briefly before the volume can be changed (see chapter ‚Basic settings
of the PSD 3100 HV').
A long press on this knob switches to balance adjustment: turning the knob to left or
right then alters the balance in the corresponding direction. Press the knob again long to
conclude the adjustment and save the setting.
Rotating this control selects a track for playback; the selected track then
appears on the screen. As soon as the desired track number lights up,
the track can be started by pressing the incremental control.
In addition to selecting tracks, the SELECT-knob also has other purposes
j
such as menu and list control functions. For further details see the chapter
entitled 'SETTINGS' .
Advertisement
Table of Contents
