Standard Horizon CP1000C Owner's Manual page 32

LANGUAGE
KEY BEEP
AUTO INFO
TIME LINE
CURSOR WINDOW
ZOOM TYPE
MAP ORIENTATION
MEASURE DST & BRG When this function is turned on allows a distance to be measured between two points using
UNITS OF MEASURE
Page 34
Default setting is English.
Allows the beep produced when a key is pressed to be turned on or off.
By default when the cursor is moved over a buoy, Mark or other item a popup window will show
information of the item. This menu item allows the window to be turned on or off.
Is a line projected from the vessel icon which indicates the distance your vessel will travel at
the current speed. Selections are 2, 10, 30 minutes, 1, 2 hours and infinite.
By default when the cursor is moved a window is shown with the lat/lon Distance and bearing
from the vessels location to the cursor. This selection allows the window to be turned off.
The default setting changes scales in or out with each press of the ZOOM IN or ZOOM OUT
key. When ZOOM BY SCALE is selected and either the ZOOM IN or OUT key is pressed a
popup window is shown allowing you to choose the scale to zoom to using the ShuttlePoint
knob.
Selections are:
North Up : The Top of the page is fixed to North
Course Up: The top of the page is orientated to the direction the vessel is heading.
the Shuttlepoint knob and [ENTER].
Units of Measure can be selected for Distance, Speed, Depth and Altitude.
GPS chartplotters