Danfoss VLT OneGearDrive Operating Instructions Manual page 4

Contents
5 Commissioning
5.1 Measures before Commissioning
5.2 Commissioning Procedure
6 Maintenance, Diagnostics and Troubleshooting
6.1 Maintenance
6.2 Inspection during Operation
6.3 Repair
6.4 Oil
6.5 Spare Parts
7 Decommissioning
7.1 Dismounting
7.2 Product Returns
8 Specifications
8.1 Nameplate
8.2 Storage
8.3 Permanent Magnet 3-phase Synchronous Motor
8.4 General Specifications and Environmental Conditions
8.5 Dimensions
8.6 Options
2
Operating Instructions
5.1.1 Overview
5.1.2 Motor Component
5.1.3 Gear Unit Component
6.1.1 Replacing the Brake and Rotor
6.1.2 Adjusting the Nominal Brake Torque and Replacing the Springs
6.4.1 Oil Changes
6.4.2 Oil Grade
6.4.3 Oil Volume
6.4.4 Changing the Oil
8.2.1 Measures during Storage
8.2.2 Measures after Storage
8.5.1 OneGearDrive Standard
8.5.2 OneGearDrive Standard with Torque Arm in Front Position (optional)
8.5.3 OneGearDrive Hygienic
8.5.4 OneGearDrive Hygienic with Torque Arm in Front Position (optional)
8.6.1 Torque Arm Set
8.6.2 Mechanical Brake
8.6.2.1 Overview
8.6.2.2 Technical Data
Danfoss A/S © 06/2014 All rights reserved.
16
16
16
16
16
16
17
17
17
18
18
19
19
19
20
21
21
21
22
22
22
23
23
23
23
23
23
23
24
24
25
25
27
27
27
28
28
28
MG75C402